Editing CP Box

[[File:CP Box Front.png|thumb]] [[File:CP Box side.png|thumb]] [[File:CP Box Other SIde.png|thumb]]

https://fccid.io/NCC/CCAB20LP129BT4

Model Number: CPBH-100

the NCC page for a Testing Kit for PlayStation 5 mentions a so called "CP Box"
it is a black box with a USB C input, USB C output, ethernet and power cable.

There are two modes the CP Box can run in
"Engineering Mode" and "Normal Mode"

In engineering mode the CP Box is simply plugged into power, with the USB-C Cable in the PS5. 
<gallery>
File:Engineering mode.png|frame|Engineering Mode NCC Diagram
</gallery>
(the traditional chinese there says "Engineering Mode")

however in Normal mode, the CP Box USB-C Port is plugged into a USB-C Portable Hard Drive,
and the Ethernet is plugged into your router / network hub, and the USB-C Cable into the ps5.

<gallery>
File:Normal Mode.png|frame|Normal Mode NCC Diagram
</gallery>


The "USB Dongle" mentioned here is mentioned in another document to be a USM16CA1 which is a [https://www.bhphotovideo.com/c/product/1217802-REG/sony_usm16ca1_s_16gb_usb_type_c_type.html standard USB-C flash drive]

on the front of the CP Box it says
    CP INIT
    NETWORK INIT
    
    SPEED
    LINK/ACT
    
    STATUS

The CP Box is a device which plugs into a TestKit and used to connect to a host computer. If a CP Box is not plugged into a TestKit, the TestKit will be in Release Mode. The Ethernet port on a CP Box (DEV LAN) is used to connect to the host computer.

and the USB Hard Drive maybe for Packages? or games?

Or perhaps its related to the Communication Processor similar to that on the PSVita, maybe its just an external version of it? 
i dont know ;-;

oh and the the NCC page for the DevKit makes no reference to a "CP Box" it appears to be built into it instead

<pre>
ProtoType CPBOX 
Logic Board model CPB-K01
main system chip CXD90046GG ,SEC 928 KLMAG1JETD ,SEC 007 K4A8G16 ,Winband 25Q256JVEQ
VR port (USB-C) CYUSB3014-BZX , WinBand 25Q80DV1G
TypeC (USB) SIL 2105 ,Winband 25Q16JVN1Q
Lan RJ45 RTL81530
panel switch rout to 2 PM539 for different GPIO switch (peset by regist)
MARVELL 88E6352 link up  PORT1 CP , PORT3 DEVNET , PORT0 USB ,
2 main CP system ( recover mode and normal mode )  
internal CP RST for hard reset CP 
big button is joy up down left right with enter with menu
</pre>
<pre>
TEST KIT need CP Box connected  "before Power ON"
NO CP BOX , debug setup setting will auto switch to > "Release mode"
with CP BOX , debug setup setting can switch to > "Assist Mode"
PS5 SYSTEM ON can not hot plug CP BOX , it will show up error message  
PS5 in Assist Mode will save in memory ( even no power ) , but power on time will check CPBOX again
CP BOX can check PS5 info (serial , Assist mode/Release Mode) even PS5 system is shut down   
</pre>
<pre>
CPBOX VP port(TYPE-C) will active for use HMD2/NEXT GEN VR/VR2 after cpupdate ver 2700
</pre>


<gallery>
File:Cpbox 1295.jpeg
File:Cpbox 1296.jpeg
File:Cpbox 1297.jpeg
File:Cpbox 1298.jpeg
File:Cpbox 1299.jpeg
File:Cpbox 1300.jpeg
File:Cpbox 1301.jpeg
File:Cpbox 1302.jpeg
File:Cpbox 1303.jpeg
File:Cpbox 1304.jpeg
File:Cpbox 1305.jpeg
File:Cpbox 1306.jpeg
File:Cpbox 1307.jpeg
File:Cpbox 1308.jpeg
File:Cpbox 1309.jpeg
File:Cpbox 1310.jpeg
File:Cpbox 1311.jpeg
File:Cpbox 1312.jpeg
File:Cpbox 1313.jpeg
File:Cpbox 1314.jpeg
File:Cpbox 1315.jpeg
File:Cpbox 1316.jpeg
File:Cpbox 1317.jpeg
File:Cpbox 1318.jpeg
File:Cpbox 1319.jpeg
File:Cpbox 1320.jpeg
File:Cpbox 1321.jpeg
File:Cpbox 1322.jpeg
File:Cpbox 1323.jpeg
File:Cpbox 1324.jpeg
File:Cpbox 1325.jpeg
File:Cpbox 1326.jpeg
File:Cpbox 1327.jpeg
File:Cpbox 1328.jpeg
File:Cpbox 1329.jpeg
File:Cpbox 1330.jpeg
File:Cpbox 1331.jpeg
File:Cpbox 1332.jpeg
File:Cpbox 1333.jpeg
File:Cpbox 1334.jpeg
File:Cpbox 1335.jpeg
File:Cpbox 1336.jpeg
File:Cpbox 1337.jpeg
File:Cpbox 1338.jpeg
File:Cpbox 1339.jpeg
File:Cpbox 1340.jpeg
File:Cpbox 1341.jpeg
File:Cpbox 1342.jpeg
File:Cpbox 1343.jpeg
File:Cpbox 1345.jpeg
File:Cpbox 1346.jpeg
File:Cpbox 1347.jpeg
File:Cpbox 1348.jpeg
File:Cpbox 1349.jpeg
File:Cpbox 1350.jpeg
File:Cpbox 1351.jpeg
File:Cpbox 1353.jpeg
File:Cpbox 1354.jpeg
File:Cpbox 1355.jpeg
File:Cpbox 1356.jpeg
File:Cpbox 1357.jpeg
File:Cpbox 1358.jpeg
File:Cpbox 1359.jpeg
File:Cpbox 1360.jpeg
File:Cpbox 1361.jpeg
File:Cpbox 1362.jpeg
File:Cpbox 1363.jpeg
File:CP_Box_Charger.jpg
</gallery>

=== References ===

* [[CP Box Service Connectors]]
* [[CP Box Non Volatile Storage]]
* [[CP Box Boot Process]]