Pinout: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
(→Accessory Port: Merged with https://wiki.henkaku.xyz/vita/EHCI) |
||
| Line 64: | Line 64: | ||
|- | |- | ||
|} | |} | ||
==== EHCI ==== | |||
The accessory port found only on the original Vita models is a custom port USB interface. The port must be activated in software and so far, there does not seem to be any official public software that uses it. As of firmware 1.69, all APIs that reference the accessory port are permanently disabled. | |||
The only documented usage of this port is from an FCC filing for the PDEL-1001 development unit. It seems that some dongle attached to the device is used as part of their hardware testing framework. | |||
Revision as of 23:49, 2 November 2016
Multi-use port
| Pin | Signal |
|---|---|
| 1 | another voltage input? |
| 2 | another voltage input? |
| 3 | GND |
| 4 | audio output |
| 5 | audio output |
| 6 | I/O? |
| 7 | I/O? |
| 8 | I/O? |
| 9 | I/O? |
| 10 | ? |
| 11 | headset control GND |
| 12 | headset control data / mic? |
| 13 | I/O? |
| 14 | GND? |
| 15 | I/O? |
| 16 | GND? |
| 17 | +5V charge input |
| 18 | +5V charge input |
| 19 | GND |
| 20 | USB D- |
| 21 | USB D+ |
Accessory Port
Accessory Port - mstrp1
Accessory Port - mstrp2
Accessory Port - mstrp3
Accessory Port - mstrp4
| Pin | Signal |
|---|---|
EHCI
The accessory port found only on the original Vita models is a custom port USB interface. The port must be activated in software and so far, there does not seem to be any official public software that uses it. As of firmware 1.69, all APIs that reference the accessory port are permanently disabled. The only documented usage of this port is from an FCC filing for the PDEL-1001 development unit. It seems that some dongle attached to the device is used as part of their hardware testing framework.